We all must have experienced that using the same bowling ball on an oil-coated lane can damage the ball and make it inconsistent. This is due to all the oil pouring through its coverstock and damaging the core of the body. This makes the bowling ball lose its balance and does not allow it to react with the lane. Thus, providing the user with a sloppy and low-performance bowling ball. It is also highly likely that the bowling ball will have a low hook and flare potential due to the less back-end reactivity.
We have made a step-by-step process as to How To Clean A Bowling Ball With Dawn. This will help the user to clean their favorite and precious bowling balls with ease and offer them high consistency. Hence, making them perform well while bowling and provide them with a pleasant experience.
To tackle this situation the experts and professionals recommend cleansing your bowling ball thoroughly regularly. If you are a bowler who treats the game as a hobby or is just an intermediate player, then there is no point in spending a hefty amount of money. Getting a bowling ball cleaned can cost a fortune if you get it done by a professional after every game. And if you do not how to clean a bowling ball with dawn it will get inconsistent and reduce the life span of the ball.
How to clean a bowling ball with dawn- Step By Step Guide
Step 1- Picking A Good Dish Soap Brand
The first and foremost step would be to buy a dish soap that is high performance and provides the user with great and effective results. Most of the products available in the market provide you with a dish soap that is highly effective to use. As the composition of the product has been done in a way that it deeply cleans a product and gets all the dirt and oil out of the product.
There is no particular brand that offers the highest performing product. Thus, any brand with a great cleansing action can be selected to completely saturate your bowling ball with any dirt or oil in it. A dish soap solution can go through the surface of the bowling ball and help leak all the oil that has been trapped inside it.
Most of the bowlers trust Dawn dish soap solution as it is easily accessible and provides the user with good results. This product will be able to bleed through the heavy coverstock of the body and provide the user with a deep cleansing action. Thus, leaving the user with a bowling ball that is crystal clear of any oil or dust and is highly effective to use.
Step 2- Preparing A Mixture of Dawn, Water, And Ammonia Solution
A Dawn dish soap solution has a formula that is not very harsh to use. Thus, it will not damage the bowling ball while cleansing it of all the dirt and oil trapped inside the cracks and crevices of the ball. It is high performance and will deep clean all the oil out of the bowling ball with ease. Thus, making it a comfortable and user-friendly product to use.
So, now when we have established the dish soap solution that we are going to use let’s start with building up the cleaning solution. First, take one-fourth cup full of the dawn solution and mix it with some ammonia. Now pour some lukewarm water on top of this mixture. This mixture would be the final and perfect recipe that a user needs to completely get rid of any oil and dirt that has deeply settled itself inside the bowling ball.
In this mixture, the dish soap solution will act as the primary cleaning agent which will help the user get rid of all the dirt on the bowling balls surface. We also need a little bit of ammonia as the dawn solution will not be able to bleed itself through the ball’s heavy coverstock body. Thus, an uplifting agent is required to make the process quicker and easier. The combination of ammonia and dawn solution will pour through the bowling ball’s surface with ease and leak all the oil and dirt residue that has been trapped in its core.
Finally, the water is used as the activating agent that will provide not only lubrication and fluidity to the whole mixture. But will also activate the formulas present in dish wash and ammonia solution. It will help them bond and mix them well to make a perfect cleaning solution. Hence, leaving the user with a perfect solution for cleaning their bowling ball with ease and not even costing them a lot of money.
Step 3- Tapping The Holes Of A Bowling Ball
The third step in this process is to tape the finger holes of the bowling ball. As the cleaning solution can pour through these cavities and harm your bowling ball. A user might consider that it is ridiculous to cover the holes of a bowling ball as it is what the process demands. As the cleaning solution will be able to pierce through all the coverstock down to its core and will be able to release all the oil.
Well if you think in these terms you are mistaken. As the cleaning solution might be reaching the core of the ball but is doing more bad than good to the bowling ball. As it is going to waterlog the bowling ball and make it even more inconsistent and damaged to use.
Thus, it is highly important to check if the bowling ball has been taped well with water-resistant tape before pouring it into the cleaning solution. Hence, making it a pleasant and hassle-free experience that will not damage the bowling ball and provide the user with efficient results.
Step 4- Immersing The Bowling Ball In Cleaning Solution
The fourth step is to dip the bowling ball and submerge it inside the cleaning solution for twenty minutes. Make sure that the water you mixed in the water solution is still warm. The bowling ball has to be dipped completely dipped inside the solution. Then all the user has to do is wait and keep an eye on the bowling ball. After twenty minutes the bowling ball should disperse some oil that had been trapped inside the coverstock of the body. It might also release some color as the ammonia might help the ball release some loose pigments from the bowling ball.
This is the only drawback of this process. As the color of the bowling ball might get a bit light after deep cleansing it. But it is something that does not harm the actual bowling ball, as it is only the loose pigments that are being detached from the bowling ball. Providing the ball with a fresh layer and resurfacing the bowling ball.
Thus, providing the user with a ball that feels brand new and performs efficiently. Hence, providing the user with a highly consistent and predictable bowling ball that will provide the user a high hook and flare potential and will glide down any lane.
Step 5- Resting The Bowling Ball On A Towel
The final step is to remove all the tapes and rest the bowling ball on a towel. Keep in mind that the bowling ball is going to be greasy due to all the oil poured out of its coverstock on its surface. Thus, it is recommended to gently dab the bowling ball clean with a towel. This is a highly effective way of cleaning a bowling ball as it gets rid of any dirt and grease with ease. It is also highly effective as compared to a simple water immersion method. As that method is not able to deep cleanse a bowling ball of all the oil present in it.
The light color of the bowling ball will also be repaired as you start using the bowling ball again on the tracks and when it starts to saturate itself with oil. The user should keep in mind that bowling balls should be cleaned regularly if they want their bowling ball to last for a longer period and provide them with high efficiency. Hence, providing the user with a bowling ball that is comfortable to use and is highly accurate. Thus, helping them to push themselves to the next level and reach their maximum potential.
Conclusion
We have done all the work and provided the user with a complete guide on how to thoroughly cleanse their bowling ball using a dawn solution. This step-by-step guide will help the user maintain their bowling ball with ease and provide them with efficient results. It is an easy-to-follow tutorial and provides the user with all the advantages and disadvantages of this method. Hence, leaving the user with a bowling ball that is crystal clear and does not cause them a fortune to clean regularly.