We all know that bowling balls that are made out of reactive coverstock material use the oil patterns of a lane to their advantage. Using a bowling ball continuously on oily lanes can damage the bowling ball’s core. As it might make the bowling ball too greasy and hard to hole. This can even result in an injury if the bowling ball is slipped from the user’s hand. An oily core can also damage a reactive bowling ball, as the ball would no longer be able to deliver the user with high hook potential.
This makes it very important to clean the bowling ball effectively. Providing the user with a ball that is highly consistent and will help the user improve rapidly. It will also avoid any chance of the user getting an injury due to the slippery surface of the bowling ball.
How To Remove Oil From Bowling Balls will also allow the user with a high hook potential which will help the customer perform well while bowling. Hence, making it very important to cleanse the bowling ball of any oil regularly.
We have made a detailed step-by-step method how to remove oil from the bowling ball. This will help the user to cleanse their bowling balls with ease. It will also be a cost-effective method as you do not need to buy any unnecessary equipment or take the bowling ball to a professional. It will also help in keeping the bowling ball more durable and making it perform better for a longer period. Hence, making it highly essential to follow these steps and provide proper care and maintenance for efficient results.
How To Remove Oil From Bowling Balls-Step By Step Guide
To remove oil from a bowling ball we are going to use a water immersion method. This will thoroughly cleanse the bowling ball of any oil trapped inside its core or crevices of the bowling ball. Thus, providing the user with a fresh and clean bowling ball after cleaning it regularly. The steps to clean the bowling ball through this method is as follows:
Step 1- Preparing Hot Water For The Bowling Ball
The first step to cleanse the bowling of any oil and dirt residue would be to find a container that has an appropriate height and width. Any kind of bucket or bowl can be used to contain the bowl and should act as a cavity to secure the bowling ball in its place. Thus, letting the user wash it thoroughly and provide the user with efficient results.
Luke-warm water should be used to deprive the bowling ball of any oil left inside its Heavy-duty coverstock body. As hot water might damage the surface and interior mechanism of the bowling ball. A bathroom sink can also be used as long as the bowling ball is completely submerged inside the water. The user must keep in mind that the container which is going to hold the ball is going to get damaged due to the access oil being released from the bowling ball.
The container should not be filled with water as it might spill the content over after releasing oil or placing the heavy bowling ball inside it. Just one-fourth of the bucket should be filled so the bowling ball is completely submerged. Thus, not causing a wreck and offering the user a comfortable and pleasant experience.
Step 2- Covering All The Holes On The Bowling Ball
This step is missed by so many individuals who try to cleanse their bowling balls of any dirt or oil trapped inside the bowling ball. They have a perception that washing the ball without covering the holes might provide the user with effective results. But it actually might do more damage than good to the bowling ball. As it might cause waterlogging and make the bowling ball highly inconsistent and terrible to use.
Thus, making it highly necessary to use water-resistant or duct tape to secure these holes and avoiding any water to pour through. This will avoid water-logging the ball while submerging it in warm water for effective cleansing.
This is the only risky part of this immersion method. As you risk damaging the core of the bowling ball by waterlogging it. Thus, the user has to make sure that all the holes have been covered effectively and the tapping is not loose on any end. Hence, allowing the user to submerge the bowling ball in water and providing the user with a clear and cleansed bowling ball. That will provide them with consistent and accurate shots.
Step 3- Water Immersing The Bowling Ball Inside A Container
The next step is to place the bowling ball inside the container and secure it very well. Now immerse the bowling ball inside the lukewarm water. Make sure that the bowling ball’s top is fully submerged inside the water. If not then try adding more water till it is fully submerged. Also, to make sure that all the tapings are holding themselves well on the surface of the bowling ball.
If the water starts to spill everywhere from inside the container try removing a bit of water to avoid the mess that the user would have to clean up later. Preferably do this procedure in a bathroom or a bathtub, so it is easier to clean up the mess later.
Now leave the bowling ball completely submerged inside the water. It usually takes approximately thirty minutes for the oil to start leaking outside from the core and crevices of the bowling ball. This could be seen as a layer of oil that will start to deposit itself on top of the water. This oil bleeding will cleanse the bowling ball of any dirt or oil residue that had been deeply embedded in the core and surface of the bowling ball. Thus, providing the user with a bowling ball that has been cleansed of all the unwanted material.
Step 4- Gentle Rubbing The Bowling Ball Dry
The next step would be to gently rub the bowling ball dry. When the bowling ball is taken out of the water it might be very greasy and hard to hold. This can result in an injury if the user slips the bowling ball out of their hand and lets the ball drop on the floor or worse on one of their feet. Thus, requiring the user to use a towel or any type of cloth to hold the bowling ball with ease.
As the dry cloth will provide the user with extra friction and a firm grip on the bowling ball. When the bowling ball comes out of a pool of oil it tends to be very greasy as it has the oil bleeding through the coverstock and the oil layer formed on the surface due to the greasy water it was in. It is highly recommended to clean the bowling ball as soon as possible with a towel to get rid of all the oil.
Otherwise, the whole process would have been a waste of time as the oil would seep right back through the surface of the bowling ball. Thus, requiring the user to gently clean the bowling ball efficiently for premium quality results.
Note that the towel that is going to be used will now have oil stains on it. As it will absorb all the access oil from the bowling ball and provide you with a fresh and new canvas to work with. Thus, is recommended to wash the towel and use it again and again while cleansing the bowling ball. This will save the user a lot of money by not wasting money by ruining all of their towels in the house.
Step 5- Allow The Bowling Ball To Relax On A Dry Towel
The final step would be to lay the bowling ball on the floor and place a dry towel beneath its surface. Now slowly remove all the tapes from its surface. This will help the bowling ball release any absorbed water that managed to go through the tapes. Even though it is highly unlikely as most of the Duct and plastic tapes are water-resistant. This will assure the user that there is no water-logging happening inside the bowling ball.
Thus, providing the user with a ball that is highly reactive and efficient to use. The customer may be able to see a visible difference the next time they swing their bowling balls down the lane. As the bowling ball will be able to provide the user with extra control and consistency. It will also be highly responsive and react well with the lane. Hence, providing the user with high hook potential and letting the user progress at a very rapid pace.
Conclusion
We have done all the work and provided the user with a quick guide on how to remove oil from their bowling ball. This will help the user to maintain their bowling balls with ease. This article will also provide the user with a step-by-step process on how to easily get rid of all the oil that has been deeply embedded into the surface of the ball. Hence, letting the user perform better and improve at a very consistent rate.